• For installing a wall hung-standard, extended or compact WC
• Self-supporting wall frame for dry cladding bearing a 400kg load
• Low height wall frame solution for installation below windows, stairs etc.
• Steel tube structure, 45x45x1.5mm, electro-welded and anti-corrosion treated (epoxy paint withstanding 200 hours of salt spray), NF approved
• WC fixing using threaded rods (no need to cut them) and with possible adjustment after cladding completion
• Feet are made from epoxy painted steel plate (140x80x8mm) and electro-welded epoxy painted steel tubes (40x40x4mm), fixed to the floor
• Can be fixed to the wall using 2 fixing brackets
• 6 litre cistern insulated against condensation, from which components can be accessed through the flush plate window. Conforms to WRAS, EN 14055 Class 2 flushing standards, BREEAM requirements and UK Building Regulations
• Dual flush outlet valve, 6/4 litres factory preset, adjustable to 4/2,6 litres on site, WRAS approved
• Water saving and quiet fill delayed action inlet valve
• Choice of mechanical dual flush or anti-vandal single flush front flush plates

Connections:

• Water inlet connection on the inside of the cistern with 1/2″ brass isolating valve
• Supplied with 90° outlet bend, wich can be easely fixed on the frame by simply clipping it
• Supplied with accessories for protection during the construction phase

• Wall fixing structure load bearing to 400kg
• Feet delivered in the installation position
• Self-braking vertical adjustment for precise height setting
• Snap & click, wall mounting rods
• 6/4 litre dual flush, on site adjustable to 4/2.6 litre
• QUIETO delayed action ultra quiet inlet valve
• Mechanical flushing
• Insulated cistern with protection against foreign bodies
• Secure water connection inside the cisctern, built-in isolation valve accessible through flush plate
• WC connection kit supplied separately ready for the second fix

• Wall fixing structure load bearing to 400kg
• Feet delivered in the installation position
• Self-braking vertical adjustment for precise height setting
• 6/4 litre dual flush, on site adjustable to 4/2.6 litre
• QUIETO delayed action ultra quiet inlet valve
• Mechanical flushing
• Insulated cistern with protection against foreign bodies
• Secure water connection inside the cisctern, built-in isolation valve accessible through flush plate
• WC connection kit supplied separately ready for the second fix

• Delayed action
• Compact body
• Low pressure
• Quiet fill
• Anti-backflow
• 1/2″ Plastic tail
• Pressure range 0.1-10 bars

• Wall fixing structure load bearing to 400kg
• 6/4 litre dual flush, on site adjustable to 4.5/3 litre
• WRAS approved 95L inlet valve
• Mechanical flushing
• 1/2″ brass isolation valve
• Insulated cistern
• Access for maintenance through the flush plate
• Includes 90° drain connection kit

• Can be installed into ceramic or plastic cisterns, for replacement or as original equipment
• Push button: dual flush
• Actuation effort below 20 Newton
• For lid holes ranging from 16 to 50mm, with or without collar depending on the diameter
• Button off-center +/- 15mm
• Stirrup: adjustable in increments of 10 mm
• Adjustable overflow, in increments of 10mm
• Adjustable small flush, from 2l to 4.5l (no cutting required)
• Adjustable deadwater level up to 60 mm
• High flush rate of 3.5l/s
• Foam pan seal supplied for compensating pan irregularity

• For installing a wall hung-standard, extended or compact WC
• Self-supporting wall frame for dry cladding bearing a 400kg load
• Designed for wall installation
• Low height wall frame solution for installation below windows, stairs etc.
• Steel tube structure, 30x30x1.5mm, electro-welded and anti-corrosion treated (epoxy paint withstanding 200 hours of salt spray), NF approved
• WC fixing using threaded rods (no need to cut them) and with possible adjustment after cladding completion
• Feet are made from epoxy painted steel plate (80x30x5mm) and electro-welded epoxy painted steel tubes (25x25x3mm), fixed to the floor
• Can be fixed to the wall using 2 fixing brackets
• 6 litre cistern insulated against condensation, from which components can be accessed through the flush plate window. Conforms to WRAS, EN 14055 Class 2 flushing standards, BREEAM requirements and UK Building Regulations
• Dual flush outlet valve, 6/4 litres factory preset, adjustable to 4/2,6 litres on site, WRAS approved
• Water saving and quiet fill delayed action inlet valve
• Choice of mechanical dual flush or anti-vandal single flush front flush plates

Connections:

• Water inlet connection on the inside of the cistern with 1/2″ brass isolating valve
• Supplied with 90° outlet bend, wich can be easely fixed on the frame by simply clipping it
• Supplied with accessories for protection during the construction phase